Low Temperature
Fast Dry Waterborne Printer Friendly
Characteristics:
- Can be applied at temperatures as low as 35⁰F and rising
- Meets Fed Spec TT-P-1952 E Types I & II
- Excellent glass bead retention and night visibility
- Non-flammable
- Non-bleeding
- Dry through in 2 hours maximum even at high humidity and low temperatures
- Spreading rate of 100 to 110 square feet per gallon
- Easy clean-up with soap and water
- Recommended for sealcoated surfaces, airfields, and highways
Cautions:
- CANNOT be used in galvanized, brass, aluminum, or steel equipment – Recommend stainless steel or plastic components
- Keep from freezing
- Addition of water or other soluble solvents will adversely affect dry time
Specifications:
Viscosity: 90 – 95 Krebs Units
Weight per gallon: 13.50 minimum
Dry to NPU: 1 to 3 minutes track free at 15 mils wet
Vechile Type: Acrylic emulsion for cold temperature application
Total Solids: 75% minimum
Water Resistance: 2 hours minimum drying at temperatures above 35⁰F and humidity below 80% before exposure to moisture
Shelf Life: 1 year minimum properly stored
Low Temp Documentation:
Safety Data Sheets
Low Temp (White) Safety Data SheetLow Temp (Lead Free Yellow) Safety Data Sheet
Low Temp (Black) Safety Data Sheet
***Note*** Colored buttons are strictly for visual navigation and are not the exact color upon application of the product.