afety Coatings, Inc.

Home of ROADRUNNER Traffic Paints

Federal Specification

TTP-1952E Type I Printer Friendly

  • Lead and Chromate free
  • Low VOC; less than 100 grams per liter
  • Excellent glass bead retention and night visibility
  • Non-flammable
  • Non-bleeding
  • Dry through in 2 hours maximum even at high humidity
  • Spreading rate of 110 to 130 square feet per gallon
  • Easy clean-up with soap and water
  • Recommended for sealcoated surfaces, airfields, and highways
  • 100% Acrylic Binder
  • CANNOT be used in galvanized, brass, aluminum, or steel equipment – Recommend stainless steel or plastic components
  • Keep from freezing
  • Addition of water or other soluble solvents will adversely affect dry time
  • All equipment should be cleaned before paint dries

Viscosity: 80 to 90 Krebs Units

Weight per gallon: 13.50 minimum

Dry to NPU: 1 to 3 minutes track free at 15 mils wet

Vechile Type: 100% Acrylic Fast release resin

Total Solids: 77% minimum

Water Resistance: 2 hours minimum drying at temperatures above 50 degrees F and humidity below 80% before exposure to moisture

Shelf Life: 1 year minimum properly stored

FED TTP-1952E Type I Documentation:

Safety Data Sheets
TTP-1952E Type I (White) Safety Data Sheet
TTP-1952E Type I (Lead Free Yellow) Safety Data Sheet
TTP-1952E Type I (Black) Safety Data Sheet
TTP-1952E Type I (Handicap Blue) Safety Data Sheet
TTP-1952E Type I (Safety Red) Safety Data Sheet

***Note*** Colored buttons are strictly for visual navigation and are not the exact color upon application of the product.